easy // Programmable Relays are ideal where multiple push buttons, relays and timers are used–car washes, automatic doors, lighting, pump control. The easy and MFD-Titan device series stands out with its user-friendly operation and programming, with particular importance being placed on simple circuit. Eaton Moeller EASY Relay. For technical or sales support call the Eaton Electric Automation and Motor Control Experts.
|Published (Last):||16 June 2017|
|PDF File Size:||6.42 Mb|
|ePub File Size:||8.44 Mb|
|Price:||Free* [*Free Regsitration Required]|
Setting the Debounce will cause an input to delay activation until a “steady” signal is received. Figure 9 Now move down to the 3rd line, and press OK twice to enter I1. Figure 18 Counter Relays: If input 1 I1 is activated then output relay 1 Q1 is activated. Note the 2 numerical displays show the actual voltages present at the 2 inputs. Press the OK button, for the Main Menu. This is shown as Q3. Move one digit to the left and use the UP cursor to change to one of the other types.
There are 6 specific analog comparators to work with: Permissible displays include actual text as well as variables such as actual values and setpoints of timers, counters, and the time of day. The default is “RUN” and the programmer will likely want to connect a start button to an input to start the machine actually running. When easy5112 preset time is elapsed, then timer contact T1 will activate output relay Q1 The “X” in the upper-left corner of the parameter display indicates the type of timer, in this case “on-delay”.
Notice the “wires” appear automatically. Only models specifically designated as Master or Slave can be easy5512 for expansion.
Enter an incorrect password 3 times, and the program will be deleted and the password removed and you may then put mqnual a new program. Fill in any missing “wires” and you’re done!
The unit will automatically detect the presence of a Card, and the Program Menu will then have an additional choice: Shown is a pushbutton on Input I2 and a limit switch on Input I4. Those 4 letters are known as “channels”.
On models that have the clock, the “WE” on the right indicates “wednesday” and below that is the time of day in 24 eaxy512 format. Portuguese, Dutch, Swedish, Polish and Turkish.
Klockner Moeller EASY Programming Instructions
You are now at the 2nd column so press ALT for the line drawing tool, and “wire” input 2 as shown, then press ALT again to turn the line tool off. When the TT1 “trigger” coil is activated, the time count begins and the timer’s contacts close when the preset time is reached and then remain closed until power is removed from the trigger coil TT1. Up to mnaual Text Variables D1 thru D8 can be defined, each of up to 12 characters.
You tell them apart by the A, B, C or D near the lower right corner. The large round cursor disk is used to move around menus or circuit diagrams and is operated by pressing near the top, bottom right or left edge. A momentary activation of the reset coil RT1 will stop easy5512 timer dead and the elapsed time will remain at zero.
Setting a password of will completely delete a previous password. Analog Comparator Relays are available to process the information. A text will be displayed whenever that Text Variable D1 thru D8 is activated.
Moeller EASY Manuals
Siemens Sirius and Klockner Moeller Eaton stocking distributor: Now press the ALT button again, to turn the line drawing tool off. Instead, use 3 symbols and a “marker relay” coil, then place a contact from the marker relay at the beginning of the next line, then continue on.
The Memory Card is also a convenient way to archive a copy of the program in case of damage to the unit.
When the preset time is reached then the timer switches. Figure 31 shows a typical parameter screen, in this case a timer.
The clocks are not aware of the year or date, but they do track the day of the week.
Also note that the Series units with 12 inputs also use I7 and I8 as their analog inputs. This is identical to the normal off-delay ” ” function except that the time will be a random number between zero and the preset time.
Output Q1 is energized when I1 is activated, and drops out if I1 is deactivated. If I2 activates the direction coil DC1, then pulses from I1 will count down I3 can be used to reset the counter back to zero. This is used to set system defaults and startup behavior. These are used to count pulses, usually from inputs.
Use the up and down cursors to change individual values. I3 operates the “reset” coil and causes Q2 to drop out.
Moeller EASY512 Manuals
Enter the symbols shown at left. I2 operates the “set” coil and latches the Q2 in. Figure 44 Connecting Transistor Outputs: Depending on the proximity switch, there are 3 possible solutions: This can make a very handy alternator circuit.